![Miele H 4330 Operating Instructions Manual Download Page 76](http://html.mh-extra.com/html/miele/h-4330/h-4330_operating-instructions-manual_236189076.webp)
. . . cakes or biscuits are unevenly
browned
There will always be a slight
unevenness. Product information
sheets give a percentage result for
standard browning tests. These refer to
results for one tray.
If browning is very uneven, check
when baking with
Fan plus
Y
:
– whether the temperature was set too
high,
– whether the roasting filter was in
place,
– whether the correct shelf level was
used.
when baking with
Conventional
CB
:
– the colour and material of the baking
tins being used. Light coloured,
shiny, or thin walled tins are less
suitable,
– whether the correct shelf level was
used.
. . . there has been a power cut and
the time of day is flashing in the
display.
All pre-set times have been deleted
because of the power cut.
You will have to enter the cooking
processes again.
. . . "
F
" and a number appear in the
oven display
This combination indicates a fault.
– "
F 23
": The pyrolytic temperature of
approx. 460 °C was not reached.
This could have been caused by too
much soiling in the oven to start with.
Remove all coarse soiling before
starting the pyrolytic cleaning
programme again.
If the fault message appears again
please contact the Miele Service
Department.
– "
F 3I
": The door has not locked.
Interrupt the pyrolytic cleaning
programme by switching the oven
off. Then start it up again.
– "
F 32
": The door has not locked.
Interrupt the pyrolytic cleaning
programme by turning the
programme selector to "0". Then start
it up again.
If the fault code appears again call
the Miele Service Department.
– "
F 33
": The door lock for the pyrolytic
cleaning programme will not open.
Interrupt the pyrolytic cleaning
programme and turn the programme
selector to "0". If the door lock will still
not open please contact the Miele
Service Department.
– "
F55
": the oven has automatically
switched itself off during use. This is
a safety feature to protect the oven if
it has been operating for an
exceedingly long period. The length
of time depends on the oven function
selected.
The oven can be used again immedi-
ately by simply turning the
programme selector to "0" and
entering the process again.
For
all other fault codes
please
contact the Miele Service Department.
Problem solving guide
76