Miele H 4080 BM, Technical Information

Page: 79 / 84

Technical Information
79
H 408x BM
4.5 Reading and Deleting the Fault Memory
Initial requirements:
Switch the appliance off.
Accessing:
Access the service mode as outlined in Section 040-4.3 or 040-4.4.
Acknowledgement indicator:
The display shows the list of service functions.
Options:
Touch the pad to the left of
FAULT INDEX...
.
Faults are indicated numerically with the most recent fault displayed first:
Fault 04
,
Fault 03
,
Fault 02
, etc.
Touch the pad next to the fault displayed.
The fault is indicated in standard text, e.g.,
Communication ST - LT
.
Delete faults:
Touch the pad next to
Clear Faults
.
Go back:
Touch the
Clear
(or
Timer
) pad. The display reverts to the previous menu.
Quit:
Touch the
On/Off
pad.
4.6 Fascia Panel Removal
1. Remove the appliance from its cabinet; see Section 011-4.3.
2. Remove the screws securing the appliance lid. Remove the lid.
Danger!
Before performing any service or repair work, discharge the high-voltage
capacitor. See Section A-2.
3. Open the door.
4. Remove the screws securing the sides of the fascia panel (Figure 040-4,
Item 1).
5. Remove the screws securing the top of the fascia panel (Figure 040-4,
Item 2).
Note:
The screws securing the sides of the fascia panel are fine thread screws, and
the screws securing the top of the fascia panel are coarse thread screws.
Take care not to mix them up!
6. Disconnect the connections from the programming and control electronics.
7. Lift off the fascia panel with electronics and remove.