manualshive.com logo in svg

Miele H 373-2 B, Operating Instructions Manual, Page: 71 / 88

Share
Download
Miele H 373-2 B Operating Instructions Manual Download Page 71

^

Push the glass cover back into the
metal brackets with the cut out edge
towards the rear.

^

Push the glass cover into its frame at
the front.

^

Replace the runners (and side liners
if fitted).

Reassemble in the reverse order, care-
fully ensuring all parts are correctly in
place.

. . . there is a distinctive smell of food
when using the oven

Make sure the catalyser is switched on.
See "Altering oven settings, setting 02".

. . . no noise is heard when the oven
door is opened during operation.

This is not a fault.
If the door is opened during operation,
the door contact switch causes the
oven heating, and the fan if on "Fan"
setting, to be switched off.

. . . a noise can be heard after baking,
roasting or grilling.

This is not a fault.
The cooling fan continues to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or in
the oven housing unit. When the tem-
perature has fallen sufficiently the fan
switches off automatically.
The temperature will fall faster when the
oven door is opened partially or fully.

Correcting minor faults

71

Summary of Contents for H 373-2 B

























































































Reviews:

No comments