Timer - use
Checking and changing
times entered:
It is possible at any time to call up the
times entered. The corresponding but-
ton for the time to be checked or
changed has to be pressed.
If times are programmed for several
processes, each process can be seen
by pressing briefly more than once on
the relevant button.
The number of times to press the but-
ton depends on the number of pro-
gramme steps entered:
Press once and the time entered for the
lower oven appears.This is indicated
by the symbol “
*
”.
Press twice and the time entered for
the upper oven appears. This is indi-
cated by the symbol “
#
”.
To check
Press the button for the time to be
checked.
“
f
”
The start time of the cooking process is
displayed. This goes out as soon as
the process begins.
“
g
”
The display shows the duration of cook-
ing time, or the time left if the pro-
gramme has started.
“
)
”
The end of the cooking process is dis-
played.
To change
Press the corresponding button.
Use the – /+ button to enter the re-
quired time.
When the indicator light in the centre of
the – /+ button goes out, the newly se-
lected time is registered. The time of
day appears in the display.
Please note the following:
If a button is pressed, where the time
was not entered but calculated auto-
matically by the system, the indicator
light in the centre of the – /+ button
does not come on.
This time cannot be altered.
To cancel times entered
To cancel, press the appropriate button
and use the “ - ” button to set the time
to “0:00”.
If the cooking time is cancelled, this
automatically cancels the start / end
time, and vice versa.
To cancel programmed
processes
Turn the oven function selector to “0”.
If there is a power cut all programmes
entered will be deleted.
27
