Miele GDU 45, Fitting Instructions Manual

Page: 12 / 48

5. Define height of decor panel
Before taking measurement X the
height of the dishwasher must be ad-
justed to that of the recess.
Screw out the dishwasher feet until it
touches the underside of the work-
top.
Measurement X :
Measure the height, X , from the lower
edge of the control panel to the bottom
of the kitchen cabinet door.
Height of decor panel: Dimension X +
2 mm . The additional 2 mm are necess-
ary to enable the front panel to slide
into the control panel for a secure hold.
Example:
Dimension X = 575 mm
+
2 mm
Decor panel height = 577 mm
Example, for Case B or Case C amount
to be cut off:
height ex works:
603 mm
required height – 577 mm
amount to be cut off: = 26 mm.
6. Aligning the front panel
Pull the dishwasher out of its recess
enough to allow easy access to the
fixing screws at the side.
Loosen the screws on each side of
the door front outer panel, and lower
the front panel.
Unscrew the decor strips.
Q
12