manualshive.com logo in svg

Miele G7106, Operating Instructions Manual

Share
Download
Miele G7106 Operating Instructions Manual Download Page 60

Program overview

60

Program When to use

Program sequence

Pre-

wash

Main

wash

Interim

rinse

Final
rinse

Drying

°F/°C

°F/°C

Normal

1

Program for regular use to completely
wash a full load of normally soiled
dishes with the ability to adjust energy
and water consumption based on the
soil load of the dishes.

140–
158/60
–70

133–

149/56

–65

Pots &
Pans

For heavily soiled dishes and normally
soiled pots,pans and utensils with dried
on residue; use 20% more detergent
than recommended.

75

55–70

China
& Crystal

For temperature sensitive glassware and
lightly soiled dishes, use 50% detergent
recommended. GlassCare program for
temperature-sensitive glasses and
dishes with light soiling.

113/45

131–

158/55

–70

Quick-
IntenseWa
sh

“Quick program” for standard dishes
soiling that has not dried on.

-

149/65

140/60

SaniWash

To sanitize dishware, e.g. baby bottles,
cutting boards and preparation dishes.

-

118–

149/48

–65

131–

158/55

–70

Rinse &
Hold

To rinse dishes when a complete
program is not needed.

-

-

-

-

1

This program is used for energy labeling purposes.

Summary of Contents for G7106

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands