manualshive.com logo in svg

Miele G 832 SC, Operating Instructions Manual

Share
Download
Miele G 832 SC Operating Instructions Manual Download Page 15

Programming the water softener

Your water hardness level must be pro-
grammed into the dishwasher using the
buttons on the control panel.

^

Make sure the dishwasher is turned
off.

^

Press and hold the "Start/Stop" button
(17) and at the same time turn on the
dishwasher with the "On/Off" button
(13). Release the "Start/Stop" button
within two seconds.

The "Rinse" (16) indicator and the Pots
& Pans indicator (14) will light and the
"Salt" (15) indicator will flash.

If this is not the case, the above steps
must be repeated.

1 - 24 gr/gal:

^

Use the program selection buttons
(19) to select the program which cor-
responds to the local water hardness.

Table 1:

gr/gal*

ppm

Program indicator

1 -   4**

20 -   70

Pots & Pans

5 -   7

90 - 130

Sani Wash

8 - 11

140 - 200

Normal Plus

12 - 16

220 - 280

Normal

17 - 21

300 - 370

China & Crystal

22 - 24

390 - 430

Rinse and Hold

* US gallons

** factory preset

The selected program indicator (14) will
flash and the "Rinse" (16) indicator will
light.

^

To store this setting press the
"Start/Stop" (17) button twice.

^

Turn off the dishwasher with the
"On/Off" button (13).

Before using for the first time

15

Summary of Contents for G 832 SC

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands