Miele G 7961 Operating Instructions Manual Download Page 81

Page: 81 / 120

Frequently Asked Questions

Fault messages

Problem

Possible cause and solution

The in-operation indica-
tor light is flashing
quickly.
The alarm tone is
sounding.
One of the following
faults appears in the
display:

Before remedying the fault:



Turn off the dishwasher.



Fault F XX: A fault has

occured, turn the appliance
off then back on again.
Restart the program. If the
fault occurs agian, contact
Miele Service.

There may be a technical fault.



Turn the dishwasher back on after a few seconds.



Select the desired program.



Close the door.

If the fault message appears again, there is a techni-
cal fault.



Turn off the dishwasher.



Turn off the water supply.



Contact Miele Customer Service.



Waterproof fault. Turn

the appliance off, close the
water supply and contact
Miele Service.

The Waterproof system has reacted.



Turn off the dishwasher.



Turn off the water supply.



Contact Miele Customer Service.



Fault F 78: A technical

fault has occcurred. Turn off
the appliance, close the wa-
ter supply and contact Miele
Service.

Circulation-pump fault.



Turn off the dishwasher.



Turn the dishwasher back on.



Select the desired program.



Close the door.

If the fault message appears again, there is a techni-
cal fault.



Turn off the dishwasher.



Turn off the water supply.



Contact Miele Customer Service.

Summary of Contents for G 7961

























































































































Search results

Summary of Contents for G 7961

Reviews:

Related manuals for G 7961

Brands by name

Popular brands

Miele G 7961, Operating Instructions Manual

Search results

Summary of Contents for G 7961

Reviews:

Related manuals for G 7961

Brands by name

Popular brands