![background image](http://html.mh-extra.com/html/miele/g-7783-cd/g-7783-cd_operating-instructions-manual_234810032.webp)
Programming special functions
Press
h
. "SP" appears in the display.
Press
h
again. The change has
been recorded and the display field
clears.
2. Increasing the temperature hold-
ing from 10 to 25 minutes in the
"Wash" part of the programme, (only
in the "B" SPECIAL programme).
Switch off the machine.
Press
T
1
and
c
at the same time,
hold them in and also switch on the
machine with "I-0". The current pro-
gramme status "P..." appears in the
display.
Press
C
. "40" or "41" will appear in
the display.
"40" = Temp. holding time 10 mins.
"41" = Temp. holding time 25 mins.
Press
c
to change from "40" to "41"
or vice versa..
Press
h
. "SP" appears in the display.
Press
h
again. The change has
been recorded and the display field
clears.
Note:
The temperature
T
1
must not exceed
85 °C, (see "Selecting additional pro-
grammes").
3. Adding neutralising agent in the "In-
terim rinse 1" part of the programme.
The machine is set at the factory for
rinsing agent to be dispensed in the
"Final rinse" part of the programme. If
neutralising agent is to be dispensed in-
stead make the following adjustment:
Switch off the machine.
Press
T
1
and
c
at the same time,
hold them in and also switch on the
machine with "I-0". The current pro-
gramme status "P..." appears in the
display.
Press
B
. "50" or "51" will appear in
the display.
"50" = Rinsing agent dosage
"51" = Neutralising agent dosage.
Press
c
to change from "50" to "51"
or vice versa..
Press
h
. "SP" appears in the display.
Press
h
again. The change has
been recorded and the display field
clears.
Programming special functions
28