![background image](http://html.mh-extra.com/html/miele/g-7151/g-7151_operating-instructions-manual_1793087069.webp)
Frequently Asked Questions
69
With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department.
This guide may help you to find the reason for the fault, and how to correct it.
This section only lists faults that you can remedy yourself. All other faults are
shown in
Fault FXX
.
Technical faults
Problem
Possible cause and solution
The dishwasher does
not start.
The door is not properly closed.
Raise the door upward until the catch engages.
The dishwasher is not plugged in.
Insert the plug.
The circuit breaker has tripped.
Reset the breaker (see data plate for the correct
fuse rating).
If the breaker trips again, contact Miele Customer
Service.
The dishwasher is not turned on.
Turn the dishwasher on with the
button.
The
button does not
respond immediately or
only responds once it
has been pressed sev-
eral times.
Energy management: the door was opened or closed
shortly before the
button was pressed. As a result,
the dishwasher was already switched on. The elec-
tronic module requires a few seconds to be ready for
operation.
Wait a few seconds after opening or closing the
door.
Then press the
button.
The dishwasher stops
during a program.
The circuit breaker has tripped.
Reset the circuit breaker (see data plate for the
correct fuse rating).
If the circuit breaker trips again, contact Miele
Customer Service.