Miele G 7150, Operating Instructions Manual

Page: 88 / 104

Problem solving guide
88
Problem Cause and remedy
White residue is visible
on the crockery. Cloud-
ing has occurred on
glassware and cutlery.
The film can be wiped
off. The rinse aid dosage is set too low.
 Increase the dispensing quantity (see “Settings –
Rinse aid”).
There is no salt in the salt reservoir.
 Fill the salt reservoir (see “Before using for the first
time – Dishwasher salt”).
The salt reservoir cap has not been screwed on cor-
rectly.
 Replace the cap, making sure that it screws back
on correctly.
Unsuitable combination detergents were used.
 Switch to another detergent. If using detergent
tabs or powder detergent, do not choose combin-
ation products and ensure you refill the dish-
washer salt and rinse aid.
The water softener is programmed to too low a water
hardness level.
 Programme the water softener to a higher water
hardness level (see “Settings – Water hardness”).
Too much detergent was dispensed.

Reduce the dispensing quantity during automatic
dispensing (if available) (see “Settings – AutoDos”).

Activate the “Second interim rinse” function (see
“Settings – Second interim rinse”).
Not enough combination detergent was dispensed.
The water softener performance is not sufficient.

Increase the dispensing quantity during automatic
dispensing (if available) (see “Settings – AutoDos”).

Add more dishwasher salt.
Plastic items are discol-
oured. Natural dyes, e.g. from carrots, tomatoes or ketchup
may be the cause. The amount of detergent used or
its bleaching effect was not sufficient to deal with
natural dyes.
 Use more detergent (see “Detergent”).
Parts that are already discoloured will not revert to
their original colour.