Installation
*INSTALLATION*
88
Electrical connection
Electrical connection
The dishwasher is supplied with an
electrical connection cable with
moulded plug ready for connection to a
switched socket.
The socket must be easily accessible
after the dishwasher has been installed.
If that is not possible, ensure that a
suitable means of disconnection is
provided on the installation side for
each pole.
Risk of fire from overheating.
Connecting the dishwasher to a
multi-socket plug adapter or to an
extension lead can overload the
cable.
Do not use an extension lead or
multi-socket plug adapter.
The electrical system must comply with
local and national safety regulations
(BS 7671 in the UK). We recommend
the use of a suitable RCD
.
If the connection cable is damaged, it
must only be replaced with a specific
connection cable of the same type
(available from the Miele Customer
Service Department). For safety
reasons, such replacement may only be
carried out by a qualified technician or
the Miele Customer Service
Department.
The data plate indicates the nominal
power consumption and the
appropriate fuse rating. Compare the
specifications on the data plate with
those of the electricity supply and make
sure that they match.
If in any doubt, consult a qualified
electrician.
Do not connect the dishwasher to a
stand-alone inverter such as those used
with an autonomous energy source, e.g.
solar power. When the washing
machine is switched on, power surges
could result in a safety switch-off. This
could damage the electronic module.
Summary of Contents for G 7100C
Page 90: ......
