Operation
48
Display programme duration
The estimated duration of the selected
programme appears on the display be-
fore the programme begins. During the
programme, the time left until the end of
the programme is displayed.
Symbols appear to indicate which stage
the programme is at:
Pre-wash/Soak
Main wash
Interim rinse
Final rinse
Drying
End
The displayed duration may vary with
the same programme. It is influenced
by, for example, the water temperature
at each inlet, the reactivation process of
the water softener, the detergent type,
and the amount of dishes and how
soiled they are.
When a programme is selected for the
first time, the display will show the aver-
age programme duration for a cold wa-
ter inlet.
The programme durations shown in the
“Programme overview” chapter refer to
standard test loads and temperatures.
Each time a programme is run, the con-
trol-display module calculates the pro-
gramme duration required according to
the temperature of the water taken into
the dishwasher and the size of the load.
Starting the programme
Press the
Start
button.
If necessary, confirm the previously
displayed message with
OK
.
The programme starts.
The
Start
indicator light will come on.
During the programme sequence, you
can use
OK
to display the name of the
programme that is currently running.
Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.
