Problem
Possible cause
Remedy
The indicator light "In-
let/Drain" lights up and
flashes alternately
The stopcock is closed.
Open the stopcock fully.
The water inlet filter is
blocked.
Before rectifying the prob-
lem you must:
–
Turn the programme
selector to the "Stop"
position.
–
Switch the dishwasher
off using the "On/Off"
button.
then:
–
Clean the water inlet fil-
ter, see "Solving prob-
lems".
The Waterproof system
has reacted.
Call the Miele Service De-
partment.
The indicator light "In-
let/Drain" lights up dur-
ing the "Energy save"
programme.
The intake water has not
reached the required tem-
perature of 45 °C, the hot
water system may be
overloaded (see
"Programme selection").
–
Start the programme
again.
–
If the indicator light co-
mes on again select a
different programme.
Problem solving guide
48
