Operation
46
Starting the programme
Start the programme by closing the
door.
The programme will begin.
The in-operation indicator comes on to
show that a programme has been star-
ted.
A programme should only be can-
celled in the first few minutes, if at
all. Otherwise important programme
stages could be omitted.
Time display
The duration of the programme selected
appears in hours and minutes in the
display before the programme begins.
During the programme the time left until
the end of the programme can only be
viewed with the door open.
The programme duration displayed may
vary with the same programme. It is in-
fluenced by, among other things, the
water temperature at each intake, the
reactivation process, the water soften-
ing unit, the type of detergent, the
amount of crockery and how dirty it is.
When a programme is selected for the
first time, the display will show the aver-
age programme duration for a cold wa-
ter intake.
The durations shown in the Programme
chart refer to standard test loads and
temperatures.
Each time a programme is run, the elec-
tronic unit calculates the programme
duration required according to the tem-
perature of the water taken into the
dishwasher and the amount of crockery.
Summary of Contents for G 6660 SCVi
