background image

Water softener

To achieve good cleaning results, the
dishwasher needs soft water. Hard
water results in calcium deposits on
dishware and in the dishwasher.
If your tap water hardness is above
8 gr/gal (140 ppm), the water should be
softened. This takes place automati-
cally in the unit’s integrated water
softener.

– Your local water authority will be able

to advise you of the water hardness
level in your area.

– The water softener must be filled with

dishwasher salt for reactivation.

If your water hardness is lower than
8 gr/gal (140 ppm), you do not need to
add dishwasher salt.

If there is a fault, it will help the service
technician to know the hardness of your
local water supply.

^

Enter the water hardness below:

gr/gal (ppm)

Water hardness

gr/gal*

ppm

1
2
3
4
5
6
7
8
9

10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35

36-70

20
40
50
70
90

110
130
140
160
180
200
220
230
250
270
290
310
320
340
360
380
400
410
430
450
470
490
500
520
540
560
580
590
610
630

650-1260

* US gallons

Before using for the first time

14

Summary of Contents for G 663 Plus

























































Reviews: