Changing a programme
Important:
If the detergent dispenser flap has
already opened, do not change the
programme.
A change can be made to the
programme selected before the door is
closed as follows:
^
Press the button for the programme
you wish to run.
^
Close the door.
The programme cycle begins.
If a programme has already begun,
change the programme as follows:
^
Open the door.
^
Press the "Off" button (16).
^
Press the "On" (15) button.
^
Press the button for the programme
you wish to run.
^
Close the door.
The in operation control light will come
on.
The programme cycle begins.
Interrupting a programme
A programme is interrupted as soon as
the door is opened.
If the door is closed again, the
programme will continue from the point
it was at before the door was opened.
,
Water in the dishwasher may be
hot. Danger of scalding! If you have
to open the door do so very care-
fully.
Before closing the door again, leave
it ajar for approx. 20 secs. This will
enable the temperature in the wash
cabinet to settle. Close the door
firmly making sure that it clicks into
place.
,
Do not touch the heating ele-
ment during a programme interrup-
tion. Danger of burning.
Operating the dishwasher
35
Summary of Contents for G 643 Plus
Page 56: ...Dishwashers with cutlery tray Upper basket Cutlery tray Lower basket Comparison tests 56 ...
Page 61: ...61 ...
Page 62: ...62 ...
Page 63: ...63 ...