Miele G 5690 Operating Instructions Manual Download Page 65

Page: 65 / 92

Problem solving guide

Door release

Problem

Cause and remedy

The optical in-operation
indicator light is flash-
ing quickly.
The alarm tone is
sounding.
The following fault is in-
dicated via the display:

Before rectifying the problem:



Switch the dishwasher off.



Fault F33

The door does not open automatically.
There may be a technical fault.



Open the door manually (see “Before using for the
first time” chapter, “Opening the door” section)
and switch the dishwasher off and then back on
again.



If the same fault message appears again, call
Miele Service.

The door locking pins do not retract after the door is
opened.
There may be a technical fault.



Switch the dishwasher back on.



If the same fault message appears again, call
Miele Service.

Summary of Contents for G 5690





























































































Search results

Summary of Contents for G 5690

Reviews:

Related manuals for G 5690

Brands by name

Popular brands

Miele G 5690, Operating Instructions Manual

Search results

Summary of Contents for G 5690

Reviews:

Related manuals for G 5690

Brands by name

Popular brands