Miele G 4948 Operating Instructions Manual Download Page 21

Page: 21 / 76

Before using for the first time



Turn the dishwasher off with the



button, if it is turned on.



Press the

Start

button and,

simulta-

neously

, switch the dishwasher on

using the



button.

Keep the

Start

button pressed for at

least four seconds until the

Start

indi-

cator light comes on.

If this does not happen, start the proce-
dure from the beginning again.



Press the



button three times.

The



indicator light will flash 3 times

at short intervals.

The set value will appear in the display
after



The flashing sequence

 

will appear in

the display.
This indicates a factory default setting
of 3.



Use the

Start

button to select the set-

ting required.
Each press on the button moves you
up a level. After reaching the highest
value, the counter starts from the be-
ginning again.

The setting is now saved.



Turn the dishwasher off with the



button.

Summary of Contents for G 4948













































































Search results

Summary of Contents for G 4948

Reviews:

Related manuals for G 4948

Brands by name

Popular brands

Miele G 4948, Operating Instructions Manual

Search results

Summary of Contents for G 4948

Reviews:

Related manuals for G 4948

Brands by name

Popular brands