Miele G 4930 Operating Instructions Manual Download Page 52

Page: 52 / 92

Operation

Switching on the dishwasher



Make sure the spray arms are not
obstructed.



Close the door.



Turn on the tap if it is turned off.



Switch the dishwasher on with the



button.

The

Start

indicator light flashes and the

indicator light comes on next to the
programme selected.

Selecting a programme

Choose your programme according to
the type of load and how dirty it is.

The different programmes and their
uses are described in the

Programme

chart

later on in this booklet.



Use the programme selector button



to select the programme required.

The indicator light for the programme
selected will light up.
The programme duration will appear in
hours and minutes in the display.

You can now select programme
options (see "Programme options").

If any programme options are selected,
the appropriate indicator lights will light
up.

Summary of Contents for G 4930





























































































Search results

Summary of Contents for G 4930

Reviews:

Related manuals for G 4930

Brands by name

Popular brands

Miele G 4930, Operating Instructions Manual

Search results

Summary of Contents for G 4930

Reviews:

Related manuals for G 4930

Brands by name

Popular brands