Before using for the first time
27
Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from
approx. 0-6 ml. It is set to a recommen‐
ded setting of approx. 3 ml at the facto‐
ry.
If the function to adjust the Sensor
wash programme has been activated,
the amount of rinse aid dispensed in
the
Sensor wash
programme can be
higher than that set.
If spots appear on crockery and glass‐
ware:
Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
Decrease the rinse aid dosage.
Switch the dishwasher off with the
button, if it is switched on.
Press the programme selector button
in, and
whilst holding it in
switch
the dishwasher on using the
but‐
ton.
Keep the programme selector button
pressed in for at least four sec‐
onds until the lower right hand pro‐
gramme indicator comes on.
If this does not happen, start the proce‐
dure from the beginning again.
Press the
Short
button 3 times.
The
Short
indicator will flash rapidly 3
times at intervals.
The dosage set will show in the display
after the
symbol.
The factory default setting of
will
appear in the display.
This indicates a setting of 3 ml.
Use the programme selector button
to select the rinse aid dosage you
want.
The dosage amount alters each time
you press the button.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Summary of Contents for G 4760 SCVi
Page 36: ...Loading the dishwasher 36 Cutlery tray Heavily soiled items ...
Page 81: ......
Page 82: ......