Setting the rinse aid dosage
You can adjust the rinse aid dosage to
optimize the results.
The rinse aid dosage can be set at
levels between 0 and 6 ml. The factory
setting is 3 ml of rinse aid. This is just a
recommendation.
If the dishes are spotty:
^
Use a higher rinse aid setting.
If the dishes are cloudy or streaky:
^
Use a lower rinse aid setting.
^
Press the
K
button to turn the
dishwasher off.
^
Press and hold the Start/Stop button
and
simultaneously
turn the
dishwasher on using the
K
button.
Keep the Start/Stop button pressed
for at least four seconds until the
"Start/Stop" indicator light comes on.
If it does not come on, start over.
^
Press the Delay start button three
times.
The Delay start indicator light flashes 3
times at short intervals.
The time display shows the flashing
sequence
p 3
.
The set value is shown in the time
display after the
P.
^
Select the desired dosage with the
Start/Stop button.
Every touch of the button increases
the level.
The setting is saved immediately.
^
Press the
K
button to turn the
dishwasher off.
Before using for the first time
13
