Miele G 2420 Operating Instructions Manual Download Page 5 | Manualshive

Page: 5 / 60

background image

Installation

The dishwasher must be installed
and connected in compliance with

the installation instructions.

Installation and repair work should
be performed by a Miele

authorized service technician. Work by
unqualified persons could be
dangerous and may void the warranty.

Do not install or use a damaged
dishwasher. A damaged appliance

is dangerous. Unplug the machine and
call your Miele dealer or the Miele
Technical Service Department.

Ensure that any plastic wrappings,
bags, etc. are disposed of safely

and kept out of the reach of children.
Danger of suffocation!

This equipment is not designed for
maritime use or for use in mobile

installations such as recreational
vehicles or aircraft. However, under
certain conditions it may be possible for
an installation in these applications.
Please contact the nearest Miele dealer
or the Miele Technical Service
Department with specific requirements.

It is recommended that the
dishwasher only be connected to

the mains with the plug (no
hard-wiring). The outlet must be
accessible at all times after installation
to disconnect the dishwasher.

,

WARNING - Fire hazard

Do not cover or crush the plug of

the appliance. Ensure that the cabinet
opening for the dishwasher provides
ample space for the plug. Installing the
dishwasher in a tight space may crimp
the power cord or put pressure on the
plug which could cause overheating.

This dishwasher should only be
installed under a continuous

counter top secured to adjacent
cabinetry.

Do not install this dishwasher
beneath a cooking surface, oven or

any appliance that radiates heat.
High temperatures from these units may
damage the dishwasher.

When installing the dishwasher
under a counter top and removing

the toekick, a build-under toekick must
be installed. Use the respective
installation kit. Danger of injuries.

Do not cut the intake hose or
submerge it in liquid. This hose

contains electrical components that
could cause injury or property damage
if cut or submerged.

Only connect the dishwasher to the
mains when all installation and

plumbing work is complete.

IMPORTANT SAFETY INSTRUCTIONS

5

«
...
3
4
5
6
7
...
»

Summary of Contents for G 2420





























































Reviews:

No comments

Related manuals for G 2420

Brand: Hoonved Pages: 16

Brand: Smeg Pages: 39

Brand: Hotpoint Pages: 56

Brand: Matsui Pages: 8

Brand: ETNA Pages: 100

Brand: LASA Pages: 60

Brand: Kuppersbusch Pages: 33

Daema DWF-1101Q

Brand: DAEWOO ELECTRONICS Pages: 17

Brand: DELLA Pages: 7

Brand: Smeg Pages: 26

Brand: Sammic Pages: 16

PermaTuf GLD28**V

Brand: GEAppliances Pages: 40

Brand: Ariston Pages: 60

Brand: Miele professional Pages: 140

Brand: Zanussi Electrolux Pages: 31

Brand: Jenn-Air Pages: 56

Brand: Lett Pages: 97

Brand: Eskimo Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands