![background image](http://html.mh-extra.com/html/miele/g-2141/g-2141_operating-instructions-manual_234638030.webp)
With the aid of the following guide, minor problems can be fixed without a service
call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Issue
Possible fault
Solution
The Start / Stop
indicator does not flash
after the dishwasher is
turned on with "
s
".
The machine is not
plugged in.
Insert the plug.
The fuse has tripped.
Reset the circuit breaker.
See data plate for
minimum amperage.
The dishwasher stops
during a program.
The fuse has tripped.
Reset the circuit breaker.
See data plate for
minimum amperage.
The program cycle
indicators "Rinse",
"Drying" and "End"
flash at the same time.
There may be a technical
fault.
– Turn the dishwasher off
"
s
".
After a few seconds:
– Turn the dishwasher on
"
s
".
– Select the desired
program with the
"Program" button.
– Press the "Start / Stop"
button.
If the problem persists,
contact Technical
Service.
The drain pump is
running when the door
is open.
The waterproof system
has activated.
– Turn off the water
supply.
– Contact Miele
Technical Service.
Frequently asked questions
30
Summary of Contents for G 2141
Page 38: ...Upper basket Lower basket Cutlery tray Comparison Tests 38 ...
Page 50: ...50 ...