Miele G 1833 Operating Instructions Manual Download Page 72

Page: 72 / 84

Language

The display can be set to appear in one
of several different languages.

You can change the language for the
display via the

Language

sub-menu.

Select the language you want and
confirm this with

The flag after the word

Language

acts as a guide if a language which
you do not understand has already
been set.
If this is the case, keep selecting the
menu option which has a flag after it
until you reach the Language

sub-menu.

Time

Select either a 24 hour or 12 hour clock
and then set the current time of day.

Display

Select the

Display

option.

Select the display you require for the
time of day, and confirm this with

Clock display

Select the

Clock display

option.

Select either the 24 hour or 12 hour
option and confirm with

Set the time

Select the

Set the time

option.

Set the hours with

+/-

and confirm

with

Then set the minutes.

After you have confirmed the minute
entry with

the display will change

back to the

Time

menu.

Touch the

sensor to return to the

Settings

menu.

Settings menu

Summary of Contents for G 1833





















































































Search results

Summary of Contents for G 1833

Reviews:

Related manuals for G 1833

Brands by name

Popular brands

Miele G 1833, Operating Instructions Manual

Search results

Summary of Contents for G 1833

Reviews:

Related manuals for G 1833

Brands by name

Popular brands