![background image](http://html.mh-extra.com/html/miele/g-1570/g-1570_operating-instructions-manual_234627055.webp)
Problem
Possible cause
Remedy
Dishes, cutlery and
glasses are not dry
or are flecked.
The rinse aid amount may
be insufficient or the rinse
aid reservoir empty.
Replenish the reservoir,
increase the dosage or
change the brand of rinse
aid. See "Before using for
the first time".
Crockery was taken out of
the cabinet too soon.
Leave it in for longer. See
"Operation".
You are using "2 in 1" or
"3 in 1" tablets, which do not
have a strong enough
drying performance.
Set the Tab function to
"Normal", and fill the rinse
aid reservoir with rinse aid.
The "2 in 1/3 in 1 Tab"
function is switched on,
even though this type of
detergent has not been
used.
Set the Tab function to the
detergent product being
used (see "Tab function").
White residue is
visible on cutlery
and crockery,
clouding occurs on
glassware; film can
be wiped off.
Not enough rinse aid was
used.
Increase the dosage. See
"Before using for the first
time".
There is no salt in the salt
reservoir.
Fill the salt reservoir. See
"Before using for the first
time".
The salt reservoir cap has
not been screwed on
correctly.
Replace it, making sure that
it screws back on correctly.
An unsuitable "2 in 1" or
"3 in 1" tablet has been
used.
Change your detergent. Use
a standard liquid, tablet or
powder detergent, and refill
the salt and rinse aid
reservoirs in the dishwasher.
There is a fault with the auto-
matic water softening
system.
Call the Service Department.
Problem solving guide
55