Miele G 1542 Page 49 Operating Instructions Manual Download

Page: 49 / 68

Water inlet / drain fault

Problem

Possible cause

Remedy

The buzzer sounds.
The Inlet/Drain check
indicator alternately
flashes and lights up
constantly.

The stopcock is
closed.

Open the stopcock fully.

The buzzer sounds.
The dishwasher stops
during a programme.
The Inlet/Drain check
indicator flashes.
Fault code FXX shows
in the display.

Before rectifying the problem
you must:

– Switch the dishwasher off

with the On/Off button

Faults F12/F13:
Water inlet restricted.

– Open the stopcock fully.

– Clean the water inlet filter

(see "Maintenance").

– The water pressure at the

intake is lower than 30 kPa
(0.3 bar).
Seek professional advice.

Fault F11:
Water outlet is
restricted, water
remains in the wash
cabinet at the end of a
programme.

– Clean the filter combination.

See "Cleaning and care".

– Clean the drain pump. See

"Maintenance".

– Clean the non-return valve.

See "Maintenance".

– Remove any kink in the drain

hose.

Problem solving guide

Summary of Contents for G 1542





































































Search results

Summary of Contents for G 1542

Reviews:

Related manuals for G 1542

Brands by name

Popular brands

Miele G 1542, Operating Instructions Manual

Search results

Summary of Contents for G 1542

Reviews:

Related manuals for G 1542

Brands by name

Popular brands