Before using for the first time
The stainless steel surface has a layer
of protective foil to prevent scratching
during transportation.
^
Do not remove this foil until the
appliance has been installed or built
in.
^
After removing the protective foil,
treat external surfaces with a suitable
stainless steel conditioning agent
(available from
www.miele-shop.com).
Important: Stainless steel
conditioner gives long lasting
protection, and helps to prevent
resoiling.
^
Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hours after
transporting it to its final location
before connecting it to the mains.
Operating the appliance
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Switching on
^
Touch the On/Off sensor until the
temperature display comes on.
If the temperature in the appliance is
above 0 °C, only bars will light up in the
temperature display. As soon as the
temperature is below 0 °C, the
temperature display will show the
current temperature inside the
appliance.
The "Freezing" symbol and the alarm off
sensor will flash until the freezer has
cooled down to the correct temperature
for freezing.
The appliance will start to cool, and the
lighting will come on when the door is
opened.
To enable the temperature to get
sufficiently cold inside the
appliance, allow the appliance to
run for a few hours before placing
food in it.
Do not place food in the appliance
until the temperature is at least
-18°C.
Switching on and off
13
Summary of Contents for FN 14827 S ed
