^
Unscrew upper hinge pin
k
using
the spanner supplied.
^
Using a screwdriver remove covers
l
with a flat-blade screwdriver.
^
Screw in upper hinge pin
k
on the
opposite side using the spanner
supplied.
^
Refit covers
l
from the back on the
opposite side, and then click them
into place at the front.
^
Remove caps
m
from door bearing
bushes in the door and refit on the
opposite side.
^
Using a screwdriver, remove spring
clamp
n
from underneath the door
and fit it on the opposite side.
^
Press the hinge pin
e
with the
washer
o
out of the hinge plate from
below.
Important. The opening on the
washer
o
must be placed over the
notch on the hinge pin
e
so that the
washer
o
sits on the washer of the
hinge plate
e
.
^
Place the hinge pin
e
with the
washer
o
in the door bearing bush
on the opposite side. Important: the
notch on the pin must face the inside
of the door and the groove the
outside.
Changing the door hinging
36
