Miele F 9252 i Operating And Installation Manual Download

Page: 38 / 48

Unscrew mounting

and pull

soft-close mechanism

downwards

to remove it.

Undo ball joint

using a spanner

and remove it.

Stand the appliance door up, and
loosen the hinges at the front (the
hinges remain open).

Remove screws

, and use the

stoppers supplied

to plug the

empty holes.

Do not

close up the hinges. Danger

of inury.

Replace the hinges in their diagonally
opposite corners

Use a powered screwdriver to secure
the hinges; screws

are

self-tapping.

To secure the soft-close mechanism

Place the door with the outer side
downwards on a stable surface.

Screw ball joint

of soft-close

mechanism

into the new fixing

holes.

Push tension spring

inwards

again.

Screw mounting

onto the hinge

and tighten securely.

Open out soft-close mechanism

and hook it onto ball joint

Changing the door hinging

Summary of Contents for F 9252 i

















































Search results

Summary of Contents for F 9252 i

Reviews:

Related manuals for F 9252 i

Brands by name

Popular brands

Miele F 9252 i, Operating And Installation Manual

Search results

Summary of Contents for F 9252 i

Reviews:

Related manuals for F 9252 i

Brands by name

Popular brands