Do not place any appliance which
gives off heat, such as a toaster or
microwave oven on top of this
appliance, as this would increase
the appliance’s energy
consumption.
Location
The appliance should be installed in a
dry well ventilated room.
The room temperature should not go
above or below the climate range for
which the appliance is designed. The
higher the ambient temperature of the
room the more energy the appliance
requires to operate. It should not be
installed where it is exposed to direct
sunlight or directly adjacent to a
heat-producing appliance such as an
oven or a radiator.
Climate range
The appliance is designed for a
particular climate range (ambient room
temperature), and should not be used
outside this range. The climate range of
this appliance is stated on the data
plate inside the appliance.
Climate range
Ambient room
temperature
SN, N
ST
T
to +32 °C
to +38 °C
to +43 °C
The appliance will function perfectly
down to a temperature of +5 °C.
Ventilation
Air at the rear of the appliance gets
warm. To ensure sufficient ventilation
the ventilation gaps must not be
covered over.
The air inlet and outlet must not be
covered or blocked in any way. They
should be dusted on a regular basis.
Handle transit position
When you open the door for the first
time, the handle will make a clicking
sound. This is quite normal and
indicates that it has adjusted itself from
its transit position to its operational
position. The handle will now protrude
slightly more in front of the appliance
than it did during transportation.
Installation
^
Remove any cable clips from the rear
of the appliance.
^
Check that all parts at the rear of the
appliance are unhindered.
^
Carefully push the appliance into
position.
Align the appliance
^
To align the appliance adjust the feet
using the spanner supplied.
Installation
34
