background image

Freezing and storing food

24

Maximum freezing capacity

To ensure that fresh food placed in the
freezer freezes through to the core as
quickly as possible, the maximum
freezing capacity must not be ex-
ceeded. The maximum freezing capa-
city for freezing within a 24-hour period
is given on the data plate: “Freezing ca-
pacity ....kg/24 hrs”.

The maximum freezing capacity given
on the data plate has been calculated
according to DIN EN ISO 15502 Stand-
ard.

Freezing fresh food

Fresh food should be frozen as quickly
as possible. This way the nutritional
value of the food, its vitamin content,
appearance and taste are not impaired.

Food which takes a long time to freeze
will lose more water from its cells,
which then shrink. During the defrosting
process, only some of this water is re-
absorbed by the cells. What this means
in practice is that the food loses more
moisture. You can see this in the large
amount of water that collects around
the food when it defrosts.

If food is frozen quickly, the cells have
less time to lose moisture, so they
shrink less. As there is not so much
moisture loss, it is easier for the food to
reabsorb it during the defrosting pro-
cess, and very little water collects
around the defrosted food.

Storing frozen food

Never re-freeze partially or fully de-
frosted food. Defrosted food may
only be re-frozen after it has been
cooked.

When buying frozen food to store in
your freezer, check:

– That the packaging is not damaged

– The use-by date

– The temperature at which the frozen

food is being stored in the shop.

The length of time food can be kept
is reduced if it has been stored at a
temperature warmer than -18 °C.

Buy frozen food once you have fin-
ished the rest of your shopping and
wrap it in newspaper or use a cool
bag or cool box to transport it.

Put it into the freezer as soon as pos-
sible.

Summary of Contents for F 32202 i









































































Reviews: