Miele F 31202 Ui Operating And Installation Instructions Download

Page: 11 / 68

Warning and Safety instructions

Cleaning and care



Do not use any oils or grease on the door seals, as these will

cause the seals to deteriorate and become porous with time.



Do not use a steam cleaning appliance to clean or defrost this ap-

pliance.
Steam could reach electrical components and cause a short circuit.



Sharp edged or pointed objects will damage the evaporator, caus-

ing irreversible damage to the appliance. Do not use sharp edged or
pointed objects to

- remove frost and ice,

- separate frozen food or remove ice trays.



Do not place electric heaters or candles in the appliance to de-

frost it. These can damage the plastic parts.



Do not use defrosting sprays or de-icers, as they could contain

substances which could damage the plastic parts or which might
cause the build-up of gases and pose a danger to health.

Transport



Always transport the appliance in an upright position and in its ori-

ginal transport packaging to avoid damage in transit.



Danger of injury and damage to the appliance. The refrigeration

appliance is very heavy and must be transported by two people.

Summary of Contents for F 31202 Ui





































































Search results

Summary of Contents for F 31202 Ui

Reviews:

Related manuals for F 31202 Ui

Brands by name

Popular brands

Miele F 31202 Ui, Operating And Installation Instructions

Search results

Summary of Contents for F 31202 Ui

Reviews:

Related manuals for F 31202 Ui

Brands by name

Popular brands