Miele F 2462 Vi Operating And Installation Instructions Download Page 39

Page: 39 / 132

Installation

*INSTALLATION*



Position the mounting frame



ac-

cording to the markings on the cabi-
net front.



Pre-drill the holes.



Screw the mounting frame



to the

cabinet front:
Use at least one screw for each re-
taining point on the mounting
frame





Secure the mounting frame



to the

top of the cabinet front, using at least
6 screws depending on the size.

The mounting frame has several differ-
ent types of holes to take account of a
variety of cabinet fronts.

When securing the frame, always
screw into the strongest part of the
cabinet front. To do this, select screws
which are slightly shorter than the
thickness of the cabinet front.



Remove the drip tray grille and the
drip tray from the Ice/Water dis-
penser.

Summary of Contents for F 2462 Vi





































































































































Search results

Summary of Contents for F 2462 Vi

Reviews:

Related manuals for F 2462 Vi

Brands by name

Popular brands

Miele F 2462 Vi, Operating And Installation Instructions

Search results

Summary of Contents for F 2462 Vi

Reviews:

Related manuals for F 2462 Vi

Brands by name

Popular brands