![Miele F 2462 SF Operating And Installation Instructions Download Page 109](http://html.mh-extra.com/html/miele/f-2462-sf/f-2462-sf_operating-and-installation-instructions_235415109.webp)
Frequently Asked Questions
109
Messages in the display
Message
Possible cause and solution
The warning sounds
and the message
Freezer
temperature too high. Max.
temperature °C
appears
on the display.
The temperature in the appliance has risen signifi-
cantly.
This could be due to, for example:
– the appliance door being opened too often, or
being left open
– a large amount of food being frozen at once
– an extended power failure
If you find the alarm disruptive, you can switch it
off in advance by touching the
OK
sensor control.
The alarm will stop.
Rectify the cause of the alarm.
The message will disappear from the display and the
alarm will stop.
The temperature display will show the highest tem-
perature that was reached during the time in which
the temperature in the freezer zone rose.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, cook it
before freezing it again.
In the event of a power failure, check whether
there are any ice cubes in the ice cube container
and dispose of these. Otherwise, the ice cubes will
freeze together and can damage the ice cube con-
tainer when they expand.
The warning sounds
and the message
Close
the door
appears on the
display.
The appliance door is open.
Close the appliance door.
If you wish to turn the alarm off early, touch the
sensor control
OK
on the display.
The alarm will stop.
Replace the water filter
ap-
pears in the display.
Change the water filter (see “Water filter”).
You can order a replacement filter from your Miele
dealer.
Summary of Contents for F 2462 SF
Page 120: ......
Page 121: ......
Page 122: ......
Page 124: ...M Nr 11 508 660 01 en US CA F 2472 SF F 2672 SF ...