The appliance is supplied right hand
hinged. If left hand door hinging is
required, follow the instructions below.
^
Close the door.
^
Unscrew lower hinge bracket
a
, and
remove.
^
Then lift the door down and off.
^
Take hinge pin
b
out of hinge
bracket
a
, then refit in the other hole
of the hinge bracket. (Use the
spanner supplied to unscrew and
refit the hinge pin).
^
Remove cover
c
and use it to cover
the now empty holes on the opposite
side.
^
Use the spanner supplied to unscrew
upper hinge pin
d
and refit it on the
other side.
^
Take care not to lose the washer.
^
Fit the appliance door from below
onto upper hinge pin
d
and then
close the appliance door.
^
Screw hinge bracket
a
into the lower
door bearing.
^
Use the long slots in the hinge
bracket to align the door. Make sure
you have tightened all screws
properly.
Changing the door hinging
32
Summary of Contents for F 12010 S
Page 34: ...34 ...
Page 35: ...35 ...
Page 36: ...Alteration rights reserved 2111 F 12010 S F 12011 S M Nr 07 297 121 01 ...
