Miele ESW 6380, Operating And Installation Instructions

Page: 8 / 44

IMPORTANT SAFETY INSTRUCTIONS
8

Any contact with live connections or tampering with the electrical
or mechanical components of the warming drawer will endanger
your safety and may lead to appliance malfunctions.
Do not open the casing of the warming drawer under any circum-
stances.

Any repairs not performed by a Miele authorized service techni-
cian will void the warranty.

Defective components should be replaced by Miele original parts
only. Only with these parts can the manufacturer guarantee the
safety of the appliance.

If the plug has been removed or the power cord is not supplied
with a plug, the drawer must be connected to the power supply by a
suitably qualified electrician.

Do not operate the appliance if the power cord is damaged. It
must be replaced by a suitably qualified electrician with a H 05 VV-F
(PVC-insulated) type power cord, available from Miele.

The drawer must be completely disconnected from the power
supply during installation, maintenance and repair work. This can be
ensured as follows:
– The circuit breaker has tripped, or
– The fuse of the electrical installation is completely removed, or
– The plug (if present) is removed from the outlet. In the process,
pull the plug not the cord.

If the drawer is installed behind a cabinet door, do not close the
door while the drawer is in operation. Heat and moisture can build up
behind the closed door and cause damage to the range and to the
surrounding cabinets and flooring. Do not close the door until the
drawer has completely cooled down.