background image

Wash2Dry 

48

Once the programme has come to a
proper end, the Miele washing ma-
chine transfers the programme data
via the router to which the networked
tumble dryer is also connected, as
well as transferring it to the Miele
Cloud.
The tumble dryer automatically sets a
drying programme tailored to the laun-
dry based on the transferred pro-
gramme data.

All you need to do is start the drying
programme once you have loaded the
tumble dryer. No further programme
settings are required on the tumble
dryer.

Tip: 

The drying programme must be

started within 24 hours of the end of the
wash programme. The data will be kept
available for the tumble dryer during
this period, but will be overwritten when
a new wash programme ends.

Tip: 

Do not disconnect the tumble dryer

from the network. The programme data
transferred by the washing machine will
be received by the tumble dryer as
soon as you select 

Wash2Dry

.

If you have disconnected the appliance
from the network beforehand, this will
cause a delay in receiving the data.

Requirements for use

In order to use the 

Wash2Dry

 function,

the Miele washing machine and
tumble dryer must be networked using
Miele@home services.

Tip: 

Set up Miele@home as described

in “Before using for the first time”.

Selecting the
Wash2Dry function 

 

Please wait

 lights up in the display of

the tumble dryer while the wash pro-
gramme is running.

Once the washing machine programme
has come to a proper end, the drying
programme tailored to the laundry will
be displayed.

Once the wash cycle has ended,
place the clean laundry in the tumble
dryer.

To start the programme, all you need
to do is press the 

Start/Stop

 sensor

control on the tumble dryer.

The programme will not start on this
tumble dryer after washing delicate
textiles (e.g. curtains) in special wash
programmes.

Summary of Contents for Eco&Steam&9kg TWR780WP

















































































































Reviews: