![background image](http://html.mh-extra.com/html/miele/diamond-g-5975-scsf/diamond-g-5975-scsf_operating-instructions-manual_234549041.webp)
Standby
A few minutes after the last key is
pressed or at the end of the program
the dishwasher switch into Standby
mode to save energy.
^
To turn the dishwasher back on press
K
.
This feature can also be turned off (see
"Settings - Optimize standby"). The
dishwasher will then turn off after
6 hours.
If refill salt and/or rinse aid or a fault
are present in the display, the
dishwasher will not turn off.
The refill messages can be turned
off when you use a tab detergent
(see "Settings-Refill display").
Fault messages cannot be turned
off.
At the end of a program
At the end of a program the optical
control light flashes slowly with the door
closed.
The optical function light goes out one
hour after the end of a program.
At the end of a program the display
shows Program finished or Drying plus
with the door slightly open (if activated).
In the "Express" program, the drying
fan will run for a few minutes after
the program is completed.
,
Dishes tend to chip if removed
still hot from the dishwasher. If the
automatic door opening setting is
deactivated (see "Settings - Drying
plus") it is recommended to open the
door manually to allow tableware to
cool much faster.
^
The dishes can now be removed.
Unloading the lower basket first will
prevent water drops from the upper
basket and cutlery tray (depending on
model) from dropping onto dishes in
the lower basket.
^
Push the baskets in.
^
Turn the dishwasher off
K
.
The dishwasher continues to use
electricity until turned off with the
K
button. After a few minutes the
dishwasher will turn off
automatically.
Use
41
Summary of Contents for Diamond G 5975 SCSF
Page 83: ...83 ...