The standard settings listed in the chart can be altered. Several settings can be
altered in succession.
Programme
Status*
P 1
S 0
S 1
Factory default settings reinstated
P 2
Demonstration
mode
S 0
Off, the appliance will heat up
S 1
On, the appliance will not heat up
P 3
Audible tone
volume
S 1
Very quiet
S 2
Quiet
S 3
Medium
S 4
Loud
P 4
Water hardness**
Hardness setting Hardness range
S 1
I
1-7 °dH
(0.2-1.3 mmol/l)
S 2
II
8-14 °dH
(1.4-2.5 mmol/l)
S 3
III
15-21 °dH
(2.7-3.8 mmol/l)
S 4
IV
>21 °dH (above 3.8 mmol/l)
P 5
Temperature unit
S 1
Unit in °C
S 2
Unit in °F
P 6
Pre-heat
S 0
Pre-heating not active
S 1
Pre-heating active
P 7
Keypad tones
S 0
Off
S 1
On
* The factory setting is shown in bold.
**Water hardness
You can use the test strip supplied to check the water hardness level, or your local
water supplier will be able to advise you on the water hardness of your area. The
water hardness is shown as settings I to IV equivalent to the German scale 1 to
>21 °dH (0.2 >3.8 mmol/l).
Programming
24
