Miele DA1260SS, Operating And Installation Instructions

Page: 35 / 44

Installation
35
 Secure the exhaust ducting to the
exhaust socket, e.g., with a hose clip
(available as an optional accessory)
on flexible ducting.

Insert the exhaust socket into the
exhaust opening and secure it by
turning it slightly clockwise.

See “Connection for vented mode”
for additional instructions on
attaching the ducting.
Preparation for recirculation
mode
 Fit the charcoal filter (see “Cleaning
and care”).
Power supply
Refer to the notes in “Electrical
connection” and “IMPORTANT
SAFETY INSTRUCTIONS” before
connecting to the electricity supply.

Connect the hood to the electrical
supply.
Functional check
 To do this, switch the blower on.
– In vented mode, the air should not
come out of the recirculation grille at
the front of the hood.
– In recirculation mode, the air should
come out of the recirculation grille at
the front of the hood.
If this does not happen, the deflector is
not installed correctly (see “Deflector”).