Miele DA 6698 D EXT Operating And Installation Instructions Download Page 26

Page: 26 / 68

Before using for the first time

Activation failed

If the wireless connection cannot be
established despite activating the
cooker hood and the hob, both
appliances must first be deactivated
and then re-activated.

Deactivating wireless connection



The hob and cooker hood must be
switched off.



Touch the run-on control



for

approx. 10 seconds until

lights up.



Then touch in turn,

– the

control,

– then the

control,

– then the lighting control



The cooker hood is now in signing on/
off mode.

If a wireless connection has already
been established,

and

will light up

constantly.



Touch the

control to deactivate

Con@ctivity 2.0.

will light up constantly,

will flash on

and off.

After a few seconds

and

will start

flashing on and off.

The wireless connection has now been
deactivated.



To deactivate the hob, see the hob
operating instructions.

Note that disabling the wireless
connection will also deactivate any
remote control function and this will
have to be activated again.

Summary of Contents for DA 6698 D EXT





































































Search results

Summary of Contents for DA 6698 D EXT

Reviews:

Related manuals for DA 6698 D EXT

Brands by name

Popular brands

Miele DA 6698 D EXT, Operating And Installation Instructions

Search results

Summary of Contents for DA 6698 D EXT

Reviews:

Related manuals for DA 6698 D EXT

Brands by name

Popular brands