manualshive.com logo in svg

Miele DA 6296 W EXT, Operating And Installation Instructions

Share
Download
Miele DA 6296 W EXT Operating And Installation Instructions Download Page 20

Operation (automatic mode)

20

Leaving automatic mode

temporarily

To leave automatic mode temporarily

during cooking:

Manually select a different power

setting, or

Manually switch the rangehood off, or

Activate the run-on option 

 on the

rangehood. The fan will switch off

after the selected time and the

lighting remains switched on.

The rangehood functions can now be

operated manually (see "Cooking

without Con@ctivity 2.0 (manual

mode)").

Returning to automatic mode

The rangehood returns to automatic

mode:

if the rangehood has not been used

for approx. 5 minutes after selecting

a power setting manually, or

if the manually selected power

setting corresponds to the automatic

one again, or

if the rangehood fan and the cooktop

have been switched off for at least 30

seconds. 

Automatic mode will resume next

time the cooktop is switched on.

If you wish to operate the rangehood

manually for a complete cooking

process, switch on the rangehood fan

before

 switching on the cooktop. 

If the rangehood and the cooktop

have been switched off for at least 30

seconds after cooking, automatic

mode will resume the next time the

cooktop is switched on.

Summary of Contents for DA 6296 W EXT





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands