Miele DA 6290 D, Operating And Installation Instructions

Page: 21 / 36

Cleaning the grease filters by hand
^
Clean the filters with a soft nylon
brush in a mild solution of hot water
and a little washing-up liquid.
Do not use "neat" washing up liquid.
Do not use:
– cleaning agents containing
descaling agents,
– powder cleaners, cream cleaners or
abrasive all-purpose cleaners.
– oven sprays.
Cleaning the grease filters in the
dishwasher
^
Place the filters as upright as
possible in the lower basket, with the
short sides upright. Make sure that
the spray arm can move freely.
^
Do not wash at more than 65° C. If a
Miele dishwasher is being used,
select the Sensor wash programme.
^
Use a mild dishwasher detergent.
Depending on the cleaning agent
used, cleaning the filters in a
dishwasher can cause permanent
discolouration to the surface.
However, this will not affect the
functioning of the filters in any way.
^
After cleaning, leave the filters to dry
on an absorbent surface before
replacing them.
^
When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
^
Replace the grease filters, making
sure that the locking clips are facing
down towards the hob.
^
If a grease filter is inadvertently
replaced upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
Resetting the Grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be reset.
^
Whilst the fan is switched on, press
the Operating hours control
l —
for
approx. 3 seconds until only the 1 is
flashing.
The Grease filter symbol
l —
goes
out.
If you want to clean the grease filters
before the operating hours counter has
reached its maximum,
Press the Operating hours control
l —
for approx. 6 seconds until only the 1 is
flashing.
Cleaning and care
21