Miele DA 6000 W, Operating Instructions Manual

Page: 35 / 40

The Miele DSM 400 control module can
be used to combine the cooker hood
with other components.
It enables the following:
Potential free connection
This can be used to operate a further
appliance via the On/Off button
s
on
the cooker hood.
If in any doubt, the advice of a
competent builder or, for gas, a Gas
Safe installer must be sought.
Connection to a light switch
The control module can be used to
switch on the hob lighting on the cooker
hood and also to dim it, depending on
model, via a light switch in the house.
If the hob lighting is activated by an
external lightswitch, the canopy tilts
forwards and the hob lighting is
switched on.
If the hob lighting is switched off, the
canopy remains open.
The feature lighting cannot be operated
via the control module.
Installation
The control module is fitted to the
cooker hood in the area of the fan and
is connected to the controls on the
cooker hood.
The electrical connection of
components to the control module
must be carried out by a suitably
qualified and competent person.
Operation with Control module DSM 400
35