Before using for the first time
19
Connecting via WPS
Your WiFi router must support WPS
(WiFi Protected Setup).
Switch the ventilation hood off.
Press and hold the
control.
Press the lighting control
at the
same time.
2
will light up constantly,
3
will flash on
and off.
The WiFi connection must be started on
the ventilation hood at the same time as
on the WiFi router.
Press the
control on the ventilation
hood after a few seconds.
After a short while,
2
will light up
constantly, and
3
and
B
will flash on
and off.
The ventilation hood is ready for
connection in the next two minutes.
Start the WiFi connection on your
router.
When successfully connected,
2
and
3
will light up constantly.
Quit connection mode on the
ventilation hood by pressing the
delayed shutdown control
.
The ventilation hood can now be
operated via the app.
If the connection fails, you have
probably not connected WPS to your
router quickly enough. Repeat the steps
above.
Tip:
If your WiFi router does not support
WPS, please connect via the Miele app.
