Miele DA 422-6 Operating And Installation Instructions Download Page 2

Page: 2 / 44

Contents

Warning and Safety instructions

.......................................................................... 4

Caring for the environment

................................................................................. 13

Modes of operation

.............................................................................................. 14

Con@ctivity 2.0 function........................................................................................ 15

Guide to the appliance

......................................................................................... 16

Operation (Automatic mode)

............................................................................... 18

Cooking with Con@ctivity 2.0 (Automatic mode)................................................... 18

Leaving automatic mode temporarily..................................................................... 20

Returning to automatic mode................................................................................ 20

Operation (Manual mode)

.................................................................................... 21

Cooking without Con@ctivity 2.0 (Manual mode).................................................. 21

Switching the fan on.............................................................................................. 21

Selecting the power level....................................................................................... 21

Selecting run-on time............................................................................................. 21

Switching the fan off.............................................................................................. 21

Switching the hob lighting on / off......................................................................... 21

Power management............................................................................................... 22

Operation (Automatic and Manual modes)

........................................................ 23

Operating hours counter........................................................................................ 23

Altering the operating hours counter for the grease filters............................... 23

Reading the filter operating hours counter....................................................... 24

Cleaning and care

................................................................................................ 25

Housing.................................................................................................................. 25

Grease filters.......................................................................................................... 25

Resetting the grease filter operating hours counter ......................................... 27

After Sales / Guarantee

....................................................................................... 28

Position of the data plate....................................................................................... 28

Installation

............................................................................................................ 29

Before installation.................................................................................................. 29

Protective foil......................................................................................................... 29

Installation instructions.......................................................................................... 29

Dismantling............................................................................................................ 29

Assembly parts...................................................................................................... 30

Appliance dimensions............................................................................................ 32

Safety distance between hob and cooker hood.................................................... 33

Installation recommendations................................................................................ 34

Summary of Contents for DA 422-6













































Search results

Summary of Contents for DA 422-6

Reviews:

Related manuals for DA 422-6

Brands by name

Popular brands

Miele DA 422-6, Operating And Installation Instructions

Search results

Summary of Contents for DA 422-6

Reviews:

Related manuals for DA 422-6

Brands by name

Popular brands