![background image](http://html.mh-extra.com/html/miele/da-398-5/da-398-5_operating-and-installation-instructions_235338015.webp)
When putting the grease filters back
make sure that the locking clips are
visibly facing the cooking surface
^
If the filters are incorrectly installed,
insert a small screwdriver into the slit
along its edge to disengage it from
the casing.
Active charcoal filter
In recirculation mode an active
charcoal filter must be used in addition
to the grease filters. It is designed to
absorb cooking odors.
The active charcoal filter will be
replaced in the canopy above the
grease filters.
Replacement active charcoal filters
can be ordered from Miele.
^
To install or replace the charcoal
filter, the grease filters must first be
removed as described in the
previous section.
^
Remove the charcoal filter from the
packaging.
^
Slide the charcoal filter into the rear
of the filter frame, then raise the front
up and push it into the frame.
^
Replace the grease filters.
Replace the active charcoal filter at
least every 6 months or when they no
longer absorb odors efficiently.
^
Used charcoal filters may be
discarded in household trash.
Cleaning and Care
15
Summary of Contents for DA 398-5
