Miele DA 3466 Operating And Installation Instructions Download Page 7

Page: 7 / 52

Warning and Safety instructions



For safety reasons, this appliance may only be used after it has

been built in.



The cooker hood must not be used in a non-stationary location

(e.g. on a ship).



Tampering with electrical connections or components and

mechanical parts is highly dangerous to the user and can cause

operational faults.

Only open the housing as described in the instructions given in the

installation sheet and in the Cleaning and care section of this

booklet. Under no circumstances should any other parts of the

housing be opened.



The manufacturer's warranty will be invalidated if the appliance is

not repaired by a Miele approved service technician.



Miele can only guarantee the safety of the appliance when

genuine original Miele replacement parts are used. Faulty

components must only be replaced by Miele spare parts.



If the electrical connection cable is faulty it must only be replaced

by a Miele authorised service technician to protect the user from

danger.



During installation, maintenance and repair work, the appliance

must be disconnected from the mains electricity supply.

Summary of Contents for DA 3466





















































Search results

Summary of Contents for DA 3466

Reviews:

Related manuals for DA 3466

Brands by name

Popular brands

Miele DA 3466, Operating And Installation Instructions

Search results

Summary of Contents for DA 3466

Reviews:

Related manuals for DA 3466

Brands by name

Popular brands