Miele DA 3160, Operating And Installation Instructions

Page: 18 / 40

Changing a halogen lamp
^
Pull out the deflector plate, and
remove the grease filter as described
earlier.
^
Switch off the fan and the lighting.
Exercise caution when changing
halogen lamps. They get very hot
during use, and remain hot for some
time after being switched off. Do not
touch the surface directly when
changing a lamp, as grease
particles from your fingers will
adhere to the surface and damage
it. Please follow the manufacturer’s
instructions.
^
Remove the charcoal filter if the
cooker hood is being used in
recirculation mode.
Before any cleaning or maintenance
work, disconnect the cooker hood
from the mains supply. Ensure that
–
it is switched off at the wall socket
and the plug is withdrawn, or
– the fuse is withdrawn from the
fused spur connection unit, or
– the mains fuse is withdrawn,or
– the screw-out fuse is removed
(in countries where this is
applicable).
^
Push down the lighting unit slightly
via the opening in the safety panel.
^
The halogen lamp is now accessible
to be unscrewed anti-clockwise.
Replace with a halogen lamp of the
same specification:
PHILIPS GZ 10, 230 V, 50 W, 50°.
^
Screw the new lamp into the socket,
and push it upwards.
^
Replace the grease filter and, if being
used in recirculation mode, the
charcoal filter.
Cleaning and care
18